The lowest price for Google Fiber Business service with a dedicated (static) IP address comprises two components:
This brings the total minimum monthly cost to $120 for 1 gigabit symmetrical speeds and one static IPv4 address.
Further details:
- Business customers receive a dynamic IP by default; the static IP is an optional add-on.
- If you need a block of 5 static IP addresses, the add-on is $30/month (total: $130/month).
- Static and dynamic IPs are assigned via Google’s DHCP, with static IPs registered to your business in public databases for transparency.
- The 2 Gig business plan is $250/month and typically includes 1 static IP by default, which would be the lowest price for a 2-gig/1 static IP combo.
Note: You must have a registered business address (not residential) to qualify for business plans and static IPs. Availability and pricing may vary by location.
Lowest possible monthly cost:
- $100 for Business 1 Gig plan
- +$20 for 1 static IP address
- Total: $120/month for Google Fiber business internet with a dedicated IP address
Here are direct answers to your questions about Google Fiber business plans with static IPs for small businesses:
1. What is the lowest monthly price for a Google Fiber business plan with a static IP?
- The lowest monthly price is the cost of the Business 1 Gig plan plus the static IP add-on.
- While residential plans may be as low as $70/month in some regions, business plans start significantly higher. Historically, the Business 1 Gig plan has been priced at $100/month, with one static IP available as a $20/month add-on. The total minimum monthly cost is $120 for 1 gigabit business fiber with one static IP. Some local markets and older plans might have slightly different pricing, but $120/month is the typical figure cited for the smallest package with a static IP.
2. Does Google Fiber offer dedicated (static) IP addresses as an add-on for small businesses?
- Yes. Google Fiber allows small business customers to add 1, 5, or 13 static IP addresses for an additional monthly fee. The most common option is the single static IP add-on.
3. How much does it cost to get a static IP with Google Fiber business plans?
- The cost for a single static IP is $20/month added to your internet plan. A block of 5 static IPs is $30/month, and larger blocks are available for businesses with greater needs.
4. Are there any special discounts or packages for small businesses needing static IPs from Google Fiber?
- No publicly advertised special discounts or bundles are currently offered specifically for small businesses needing static IPs by Google Fiber. Standard pricing applies for all customers, though package pricing may differ by city or promotion.
5. Can I get a dedicated IP address included in the basic Google Fiber business internet plan?
- No, the basic (1 Gig) business plan does not automatically include a static IP—it is available only as an add-on. However, the higher-tier Business 2 Gig plan includes one static IP by default in some areas.
Summary Table: Google Fiber Business Static IP Pricing
| Plan | Base Price (Estimated) | Static IP Add-on | Total Minimum Price |
|---|---|---|---|
| Business 1 Gig | $100/month | $20/month | $120/month |
| Business 2 Gig* | $250/month | Included (1 IP) | $250/month |
*Business 2 Gig plan pricing and features may vary by market.
Notes:
- These prices do not include taxes and may vary by city/region.
- Static IPs are registered with your legal business name and address.
For the latest offers and to verify availability and pricing in your area, check the Google Fiber Business website.
To have Google Fiber recognize your location as a business address (rather than residential), so you can qualify for a business plan and static IP, you need to ensure your address is officially registered as a commercial property. Here’s a clear, step-by-step process:
1. Confirm Eligibility of Your Address
- Go to the Google Fiber Business website.
- Enter your address and check if it is eligible for business service.
2. Verify Zoning and Address Registration
- Google Fiber verifies your location using official address databases, particularly those of the US Postal Service (USPS) and local governments.
- If your address is currently zoned residential, you will not be eligible for a business plan or static IP—even if you have a registered LLC or business with the state.
- Your address must appear as a business/commercial location in USPS records.
3. If Your Address is Zoned Residential
- You must have the property rezoned as commercial or mixed-use through your local city/county planning department.
- This typically requires an application, fees, and sometimes reviews or hearings (this process varies by locality).
- Alternatively, you can rent or purchase a location in an existing commercial building or business suite.
4. (For Multi-Tenant Commercial Buildings)
- If you are in a multi-tenant building, your property manager must sign an access agreement with Google Fiber to allow installation.
- Property managers start the process by filling out a specific form provided by Google Fiber.
5. Register Your Business With USPS (If Needed)
- If you currently operate from a residential address but it could qualify as a business (home business, etc.), you may try to register your business address with the USPS as a “business delivery point.”
- Contact your local post office and request guidance on listing your address as a business in their system. Be ready to provide business licenses, permits, and proof you operate a business from that location.
- Note: Many users report this is not accepted by Google Fiber unless official zoning changes are in place.
6. Sign Up for Google Fiber Business Service
- Once your address is recognized as business/commercial:
7. Prepare Documentation
- Have your business license, tax documents, or proof of commercial tenancy ready. Google may request documentation to validate your business status.
Recap:
- Google requires your address to be officially listed as a commercial address (not just having a business license/LLC at a residential address).
- If it’s not, you must either rezone the property (complex and time-consuming) or move to a commercial property.
- Once your address is recognized as “business,” proceed with Google Fiber’s business signup and request your static IP.
If you need the static IP solely for business purposes and cannot rezone your residence, consider alternative providers that allow small businesses to operate from home with static IPs, as Google Fiber enforces this separation strictly.
Google Fiber’s strict policy against providing static (dedicated) IP addresses to residential or home-based business customers—insisting static IPs are only for locations officially zoned and registered as commercial—stems from several operational and business reasons, not from discrimination against small businesses.
Key Reasons for this Policy
- Network Management and IP Allocation:
Static IPv4 addresses are a limited and costly resource. Google, like most ISPs, must efficiently allocate these scarce addresses, reserving static IPs for customers who pay business rates and are officially commercial entities, which justifies the operational overhead and cost. - Service Differentiation and Terms:
Google Fiber deliberately differentiates between its residential and business products. Business accounts receive higher-cost, higher-support services (including static IPs), while residential service is offered at lower price points with dynamic IPs. This distinction helps align service expectations, support levels, and pricing models around operational costs and agreements with network partners. - Contractual, Legal, and Zoning Constraints:
Service contracts and municipal franchise agreements often restrict commercial or server-like traffic (e.g., regular hosting, mail servers) from running on residential connections. Google’s policy minimizes legal issues that could arise if residential customers run commercial services under a residential plan. - Abuse Prevention and Support Structure:
Providing static IPs to all home customers could encourage use of residential connections for purposes (like web hosting, business VPN endpoints, etc.) that strain the network or increase abuse/support workloads. By limiting static IPs to business plans, Google ensures enterprises are subject to stricter agreements and pricing appropriate to heavier usage and support needs.
Impact and Perception
- Not discrimination against small businesses:
The restriction is industry standard and based on network, regulatory, and business realities. Many other ISPs offer static IPs only on business accounts and require business-zoned premises for such service. - Alternatives:
- Some home-based businesses use dynamic DNS or third-party VPN services with static endpoints.
- Other ISPs may be less strict and could be an option for home-based entrepreneurs needing static IPs without commercial zoning.
In sum, Google Fiber’s policy is about service class separation, regulatory compliance, and sustainable network management—not bias against small or home-based businesses.
Here’s where you can buy Dynamic DNS (DDNS) or third-party VPN services with static endpoints, along with typical costs and provider recommendations:
Dynamic DNS (DDNS) Providers
DDNS lets you keep a domain name updated with your changing home IP address—allowing remote access to your network or services even if Google Fiber assigns you only a dynamic IP. Many providers offer free or affordable options.
Popular Options & Costs:
Where to buy:
- Providers’ official websites: Dynu, No-IP, DuckDNS, Namecheap, HE.net, plus others found via their official sites or recommended on tech forums.
VPN Services with Static Endpoints
Third-party commercial VPNs often offer static IP addresses that you can use to always access your home or business from a single endpoint. Some also allow you to host services/servers on those static exit nodes.
Typical Features & Costs:
- NordVPN: Static IP add-on for $8/month extra
- PureVPN: Dedicated/static IP plans for about $3–$7/month on top of regular subscription
- TorGuard: Dedicated IP VPNs for $7–$15/month
- Mullvad: Offers public static IPv4/IPv6 preshared endpoints (not truly “dedicated,” but always the same), $5/month
Where to buy:
- Direct from VPN providers’ official websites under “static IP” or “dedicated IP” add-ons.
How to Decide which is right for you
| Scenario | Best Option |
|---|---|
| Hosting non-commercial projects | DDNS (Dynu, DuckDNS) |
| Business server from home | Paid DDNS (Dynu Pro, No-IP Enhanced) or commercial VPN w/ static IP (PureVPN, NordVPN) |
| Simpler remote access (e.g. RDP, cameras) | Free DDNS |
Steps to Get Started
- DDNS
- Choose a provider (see above).
- Create a free/paid account on their site.
- Follow setup instructions (typically configuring your router, DDNS client, or scripts to update IP).
- Use your assigned hostname (e.g., myname.dynu.net) to always reach your home/business.
- VPN Static IP
- Sign up for a reputable VPN service offering static/dedicated IP addresses.
- Choose your preferred static IP location/plan.
- Configure your devices to connect using the static IP.
Typical DDNS annual cost:
- Free to $10/year (premium features)
VPN static IP add-on: - $3–$15/month (in addition to base VPN subscription)
Here’s where you can buy Dynamic DNS (DDNS) or third-party VPN services with static endpoints, along with typical costs and provider recommendations:
Dynamic DNS (DDNS) Providers
DDNS lets you keep a domain name updated with your changing home IP address—allowing remote access to your network or services even if Google Fiber assigns you only a dynamic IP. Many providers offer free or affordable options.
Popular Options & Costs:
Where to buy:
- Providers’ official websites: Dynu, No-IP, DuckDNS, Namecheap, HE.net, plus others found via their official sites or recommended on tech forums.
VPN Services with Static Endpoints
Third-party commercial VPNs often offer static IP addresses that you can use to always access your home or business from a single endpoint. Some also allow you to host services/servers on those static exit nodes.
Typical Features & Costs:
- NordVPN: Static IP add-on for $8/month extra
- PureVPN: Dedicated/static IP plans for about $3–$7/month on top of regular subscription
- TorGuard: Dedicated IP VPNs for $7–$15/month
- Mullvad: Offers public static IPv4/IPv6 preshared endpoints (not truly “dedicated,” but always the same), $5/month
Where to buy:
- Direct from VPN providers’ official websites under “static IP” or “dedicated IP” add-ons.
How to Decide which is right for you
| Scenario | Best Option |
|---|---|
| Hosting non-commercial projects | DDNS (Dynu, DuckDNS) |
| Business server from home | Paid DDNS (Dynu Pro, No-IP Enhanced) or commercial VPN w/ static IP (PureVPN, NordVPN) |
| Simpler remote access (e.g. RDP, cameras) | Free DDNS |
Steps to Get Started
- DDNS
- Choose a provider (see above).
- Create a free/paid account on their site.
- Follow setup instructions (typically configuring your router, DDNS client, or scripts to update IP).
- Use your assigned hostname (e.g., myname.dynu.net) to always reach your home/business.
- VPN Static IP
- Sign up for a reputable VPN service offering static/dedicated IP addresses.
- Choose your preferred static IP location/plan.
- Configure your devices to connect using the static IP.
Typical DDNS annual cost:
- Free to $10/year (premium features)
VPN static IP add-on: - $3–$15/month (in addition to base VPN subscription)
You are very unlikely to get in trouble with Google Fiber for hosting a small, personal website at home using Dynamic DNS, as long as you are not running a mail server or operating a large-scale public/commercial hosting service.
How Google Fiber sees your usage:
- ISPs, including Google Fiber, can technically see some kinds of network activity but do not specifically monitor for Dynamic DNS use or websites hosted at home. DDNS simply allows your domain name to update to match your home’s changing dynamic IP; it’s not fundamentally suspicious or against typical policies.
- Google Fiber’s Terms of Service for residential customers typically restrict:
- Running servers “intended to be accessible by the public Internet” for commercial gain
- Any usage that would degrade, harm, or interfere with the network or other users
- In practice, many ISPs (including Google Fiber) tolerate small-scale personal website hosting (such as portfolios, blogs, or projects) as long as traffic is light and you’re not violating above restrictions.
Key points:
- Dynamic DNS by itself is not monitored or blocked.
- Many users run home labs, developer sites, or even small blogs over DDNS. This is not unique to Google Fiber and is commonly discussed in technical forums for many ISPs.
- If your website starts seeing heavy traffic, or you begin running prohibited services (like a mail server), your activity could draw attention and your service could be limited or suspended.
- Some Google Fiber routers have spotty or unreliable DDNS support; you may need to run a DDNS client on your own device or use a third-party router for reliable updating.
Will Google “know”?
- They can see network patterns, port usage, and DNS queries. They won’t specifically “see DDNS”—they’d see inbound connections to your IP if your home site starts getting significant use, and could react if abuse is reported or flagged as a violation of terms.
- For a typical personal website on a home connection, it is extremely unlikely that this will trigger any action by Google Fiber.
Bottom line:
- Hosting a small, non-commercial website at home using Dynamic DNS is common and not a violation of most residential terms, as long as you’re not running prohibited services or generating high traffic.
- You’re not at risk for “getting in trouble” for typical small-scale use. If your project grows beyond that, consider business-class service or web hosting options.
Google Fiber’s Residential Acceptable Use Policy (AUP) allows personal, non-commercial server use, but explicitly forbids operating servers for commercial purposes and generating unsolicited bulk commercial email. This means that running a low-volume, legitimate mail server from a residential Google Fiber connection is generally not permitted, even if the mail volume is small and legitimate.
Here are the key points relevant to your question:
- The AUP prohibits the use of residential Google Fiber service to “generate or facilitate sending unsolicited bulk commercial email,” but it also restricts running any server for commercial use, and mail servers—even low-volume legitimate ones—are typically treated as servers providing commercial services.
- Google Fiber monitors network traffic patterns and may block or restrict outbound email server ports (e.g., SMTP ports 25, 465, 587), which are vital for mail servers. This is a common ISP practice to prevent spam and abuse.
- While small personal websites are usually tolerated under the AUP, running email servers risks violation of terms due to the potential for abuse and spam concerns.
- If Google detects mail server activity, even at low volumes, or if your IP address becomes listed on any email blacklists, this could trigger warnings or service restrictions.
- The policy encourages using dedicated business services or professional email hosting providers for mail needs rather than hosting your own mail server from a residential connection.
In summary:
- Hosting a small personal website at home is allowed as non-commercial use.
- Hosting a mail server on residential Google Fiber, even for low-volume legitimate mail, is generally against the Residential Acceptable Use Policy.
- Google Fiber could detect this via network monitoring or port blocking and may take action.
- For email, it’s recommended to use professional third-party email hosting (like Google Workspace, Microsoft 365, or others) instead of running an email server at home on Google Fiber residential service.
If you want to comply fully with Google Fiber’s terms and avoid issues, it’s best to avoid running an email server on your residential connection—even for legitimate, low-volume mail.
AT&T Fiber
AT&T Fiber does allow residential customers to purchase static (dedicated) IP addresses as an add-on. This is unusual among major ISPs—most restrict dedicated IPs to business accounts only, but AT&T specifically offers static IP blocks to home users who request them.
- You can buy a block of static IPs on AT&T Fiber residential service. Users typically report being able to purchase a block of 8 IPs (5 usable), 16 IPs (13 usable), or larger blocks.
- The cost for static IPs starts around $15 per month for a small block (as of 2023), though recent user reports indicate $40/month for a block of 16 IP addresses (13 usable). Pricing may vary by region and is subject to change.
- To order, contact AT&T sales directly and request a static IP block for your residential plan. Some technical setup on your gateway/router may be required to utilize the IPs.
Spectrum
Spectrum does NOT offer dedicated/static public IP addresses to residential customers.
- Static IPs are available only on Spectrum’s business class internet plans, not on home internet.
- Residential Spectrum customers receive dynamic IP addresses, which may remain the same for long periods but can change at any time.
| Provider | Static IP for Residences | Cost (estimate) | How to Obtain |
|---|---|---|---|
| AT&T Fiber | Yes (blocks of IPs) | $15–$40/month+ | Contact AT&T sales |
| Spectrum | No | N/A | Not available |
Summary:
AT&T Fiber is one of the rare large ISPs that allows residential customers to purchase static IPs, typically as a block with a monthly fee. Spectrum does not offer static IPs for home users—business plan required.
The minimum order for dedicated (static) IPs on AT&T Fiber is a block of 8 IP addresses, which provides 5 usable static IPs (the rest are reserved for network, gateway, and broadcast functions).
- AT&T does not sell a single static IP address; blocks are the only offering.
- Block sizes and usable addresses:
To purchase:
Contact AT&T at 800-288-2020 and ask for a “UVerse Technical Support Representative.” Request a static IP block for your AT&T Fiber connection.
Summary:
- Minimum static IP order: Block of 8 (5 usable IPs)
- Typical monthly cost: Around $30, but verify with AT&T as rates can change.
AT&T’s policies do not explicitly forbid running a personal web server at home, especially when using a static IP, so hosting a non-commercial website on AT&T Fiber (with or without a dedicated IP) is generally allowed as long as you are not violating other terms—such as those prohibiting unlawful activity, spam, or interference with the network.
Key details:
- AT&T’s [Acceptable Use Policy] prohibits using service for unlawful purposes, spam/email abuse, harmful activity, or anything that interferes with the network or others’ use.
- There is no specific ban on personal or non-commercial web hosting in the current policies or user reports. Many users self-host personal sites, portfolios, or projects, including on static IPs, without issue.
- The most common risk comes with commercial hosting or excessive bandwidth/abuse—which could violate terms or flag your account.
- There is no policy-based email or web content inspection; AT&T would only take action if your server caused network disruption, abuse complaints, or you breached legal boundaries.
- If there’s ever a problem, most users report AT&T would warn you before any suspension, especially for low-traffic, personal sites.
Practical notes:
- AT&T makes it technically easy: port forwarding can be configured in their gateway to host your site, and static IPs integrate seamlessly.
- Some users report hosting for years without intervention for personal websites, unless high traffic or abuse occurs.
- Mail servers are a different case: running those is specifically discouraged and often blocked to prevent spam issues, but web servers do not carry the same restrictions.
In summary:
You can run a personal or non-commercial web server at home on AT&T Fiber—even with a static IP—without violating AT&T’s terms, as long as you follow laws, don’t generate abuse, and keep it non-commercial. AT&T is not likely to care or intervene in this use case.
Yes, you can technically run your own mail server on AT&T Fiber at home—as long as you are not sending unsolicited or bulk email (spam), not relaying through unauthorized servers, and not violating other aspects of the Acceptable Use Policy (AUP).
Important details from AT&T’s Acceptable Use Policy:
- You may not send unsolicited bulk/commercial email, “mail-bomb,” send messages without proper opt-out methods, or operate your server in a way that disrupts their network or others’.
- You must not use another computer or mail server to relay mail without permission.
- No maintaining a site that is advertised via unsolicited electronic messages.
- You must use only IP addresses assigned to you by AT&T.
So, if you:
- Only send legitimate, opt-in messages to known recipients
- Don’t operate any form of spam, chain mail, or bulk unsolicited messages
- Do not run open relays (which allow others to misuse your server)
AT&T’s policy does not prohibit home mail servers for personal/domestic/legitimate business use.
Further considerations:
- AT&T, unlike Google Fiber, does not routinely block SMTP ports for static IP residential users, though this can vary regionally and you should confirm for your area.
- Even with compliant use, your static IP address may still be on some common spam blacklists simply for being a residential IP, so deliverability might not be perfect.
- Ensure your server is well-secured to avoid being compromised for spam by others.
Summary:
- You are allowed to run a mail server on AT&T Fiber at home with a dedicated/static IP—if you strictly avoid unsolicited email and abide by other AUP requirements.
- If there’s an issue, AT&T will typically notify you before any account action, especially for first-time or low-volume cases.
Always review the latest [AT&T Acceptable Use Policy] for any changes prior to setting up your server.
AT&T Fiber’s maximum speed tier for home users is 5 GIG (5,000 Mbps) as of mid-2025. This plan offers true unlimited data with no data caps—you can use as much data as you want on any AT&T Fiber plan.
Here are the current main AT&T Fiber speed tiers, which may vary by area:
| AT&T Fiber Plan | Max Download/Upload Speed | Data Cap |
|---|---|---|
| Internet 300 | 300 Mbps | Unlimited |
| Internet 500 | 500 Mbps | Unlimited |
| Internet 1000 | 940–1,000 Mbps (1 GIG) | Unlimited |
| Internet 2000 | 2,000 Mbps (2 GIG) | Unlimited |
| Internet 5000 | 5,000 Mbps (5 GIG) | Unlimited |
5 GIG is the current max residential speed, available in select areas and not all markets.
Data Cap:
- All AT&T Fiber plans: No data caps—unlimited usage.
- Other AT&T residential internet types (DSL, fixed wireless) may have data caps, but Fiber is always unlimited.
Pricing:
- 5 GIG pricing varies by market but is typically advertised around $180–$250/month for new customers.
- Confirm availability and pricing for your address on the official AT&T website.
Summary:
The AT&T Fiber Internet 2000 (2 GIG) plan typically costs $145 per month for new customers. This plan offers 2,000 Mbps (2 Gbps) download and upload speeds—meaning it’s symmetric fiber with the same ultra-fast speed both ways.
- Monthly cost: $145 (may vary slightly by market, with occasional promotions as low as $114, but $145 is the standard published rate as of July 2025)
- Upload speed: 2,000 Mbps (2 Gbps)—same as download speed
- No data cap: All AT&T Fiber plans come with unlimited data usage
- No annual contract or equipment fees: Included with the plan
Summary Table:
| Plan | Monthly Price | Download Speed | Upload Speed | Data Cap |
|---|---|---|---|---|
| AT&T Fiber Internet 2000 | $145 | 2,000 Mbps | 2,000 Mbps | Unlimited |
You can check for local availability and confirm the latest pricing by entering your address at the AT&T Fiber site.
Yes, the Google Fiber router (Network Box) does allow you to configure Dynamic DNS (DDNS) settings directly in its advanced DNS settings. This means you can keep your hostname updated with your changing home IP address without the need to run separate client software on your computer.
How it works:
- Log in to your Google Fiber account and open the network settings.
- Navigate to Advanced settings, then the DNS tab.
- There you will find Dynamic DNS configuration options.
- You must have an account with a supported third-party DDNS provider (e.g., No-IP, Dynu, ZoneEdit, Google Domains, etc.).
- Enter your provider, username, password, and hostname in the DDNS section, then apply the changes.
- Once configured, the router updates your provider automatically when your external IP changes—no action needed on your devices.
Notes:
- This feature is available on most Google Fiber routers (notably GFRG200, GFRG210, and GFMN100 models).
- Some newer 2 Gig service routers or custom mesh setups may not show the DDNS option, so support can vary by device and service level.
- You can check if your specific router supports this by looking for the Dynamic DNS section in the DNS settings (sometimes under “Advanced”).
Summary:
Leave a Reply